Carbide Chainsaw Chain 16 Inch, 050" Gauge, 325" Pitch, 66 Drive Links (1 Chain).

The carbide chainsaw chain specifications are 16 inches in length, pitch 0.325 inch, gauge 0.050 inch, and 66 drive links

The compatibility table shows that this specification of carbide chainsaw chain is suitable for Husqvarna 435, 133, 136, 137, 140; Poulan 2700, 2750, 2775, 2800 and more.

Byane carbide chains have a considerably longer service life compared to standard chains, last up to 10-12 times longer.

Professional cutting, high-quality, safe and low kickback carbide chainsaw chain

Hartmetall-Sägekette 16 Zoll, 0,050" Spurbreite, 0,325" Teilung, 66 Treibglieder (1 Kette).

Byane · Hartmetall-Sägekette

$45.99 USD $46.99 USD

Free Shipping on Orders Over $50 View Shipping Policy
30-Day Easy Return & Exchange

1. What sets Byane carbide chain apart from a common chain?
The Byane carbide chain features tough carbide-tipped teeth, lasting up to 12 times longer than standard chains.

2. What does the product packaging look like?
Our chain comes in paper packaging with a biodegradable bag inside, showcasing our commitment to sustainability.

3. How do you select the right chain for your chainsaw?
Verify your model on our compatibility chart or match your saw's specs (length, gauge, pitch, drive links).

4. What is our return and exchange policy?

For quality issues within 30 days, contact us for a free return or exchange. See Returns & Exchanges for details.

Produktübersicht

Marke	Byane
Kettenteilung	0,325 Zoll
Kettentyp	Vollmeißelkette
Stärke	0,050
Artikellänge	16 Zoll

Produktmerkmale

[Verlängerte Lebensdauer und Effizienz] Hartmetallketten haben eine wesentlich längere Lebensdauer als Standardketten, halten bis zu 10-12 Mal länger, was zu reduzierten Betriebszeiten und Kosten für den Kettenersatz führt.
[Höhere Sicherheit] Das Design mit geringem Rückschlag, robusteres Material als Standardstahl und gehärtete Nieten für eine stärkere Verbindung reduzieren das Risiko von Kettenbrüchen und minimieren das Unfallrisiko.
[Erhöhte Härte] Der Hartmetallschneidkopf mit hoher Härte und die japanische Verchromung führen zu einem effektiven Widerstand gegen Verschleiß durch Sägemehl und Sand und gewährleisten einen reibungslosen Betrieb unter anspruchsvollen Bedingungen.

PASSEND FÜR DIESE BELIEBTEN MODELLE:

Echo CS-3600, CS-3900, CS-4000, CS-400EVL, CS-4100, CS-440, CS-4400, CS-450, CS-4500, CS-450P, CS-4510, CS-4600, CS-490, CS-4910, CS-5000, CS-500P, CS-501, CS-501P, CS-510, CS-510EVL, CS-520, CS-530, CS-550P Efco MT 5200

Homelite 25, 27, 4100, 4150, 4500, 4550, Super 240, TIMBERMAN, UT10518, UT10519, UT10520 42cc/46cc, UT10522, UT10526, UT10550, UT10552, UT10910, UT10927A, UT10942A, UT10946A, UT10946D, ZR10518, ZR10520, ZR10522

Husqvarna 136, 137, 141, 142, 261, 262, 36, 362 XP, 41, 435, 435E, 545 MARK II, 55, 55 RANCHER, 550XP MARK II, 550XPG MARK II

John Deere 300CS, 450V, 45EV, 46EV

Jonsered 2014, 2016, 2035, 2036, 2036 Turbo, 2040, 2040 Turbo, 2041, 2045, 2050, 2050 Turbo, 2051, 2054, 2055, 2063, 2083, 2083II, 2094, 2095, 2137, 2138, 2141, 2145, 2149, 2149 Turbo, 2150, 2159, 2163, 370, 410, 420, 425, 435, 45, 450, 451, 455, 49, 50, 51, 510, 52, 520, 520SP, 521, 525, 535, 670, 670 West Coast, CS 2050, CS 2050 Turbo, CS 2054, CS 2135, CS 2137, CS 2138, CS 2141, CS 2145, CS 2149, CS 2149 Turbo, CS 2150, CS 2152, CS 2152W, CS 2153, CS 2156, CS 2159C, CS 2159CWH, CS 2159WH, CS 2163, CS 2163WH, CS 2240, CS 2240S, CS 2245, CS 2250, CS 2250S, CS 2252, CS 2253, CS 2253WH, CS 2255, CS 2258, CS 2260, CS 2260WH

Makita DCS430, DCS431, DCS46018, DCS510, DCS5200I, DCS520I, DCS540, DCS6000I, DCS6800I, DCS9000, EA6100PREG

McCulloch MS 1846, MS 1849AV, MS 2046AV, MS 2049AV, Mac 4600, Mac 4700, Mac 4900, Mac 5000, Mac 5500, Pro Mac 1845AV, Pro Mac 40, Pro Mac 46, Pro Mac 4700, ProMac 2046AV, Silver Eagle 2818, Silver Eagle 3020, Timber Bear 20

Poulan 2700, 2750, 2775, 2800, 285, 2900, 295, 3000, 305, 3050, 306 SA, 310, 3100, 315, 3300, 335, 336, 4620, 4620AV, 4620AVHD, 4620AVX

Ryobi PCN3840, PCN4545, RY74005D, RY74007D Shindaiwa 377, 415, 416, 450, 451, 488, 500, 502s

Seems to last about but not as aggressive. Will likely purchase again.

Another one that seems to last longer, but not as aggressive? I��d rather them last longer because the way they make them anymore. I only get 30 to 1 hour of good cuts and that��s without hitting ground.

Great product

I have had this chain for over a month now. I have cut approximately 13 trees down, cut limbs off, then into 16inch pieces still sharp as the day it came in. It don't but piles of dust down it shoots out long shavings. Today i messed up got my bar pinched bad actually bent a little bit.i bought I had the same the I guy this current l chain. I fought for awhile and could not get unstuck so I went and got pry bars and hammers to try and splint trunk and free up chain. Didn't work I got mad took pry bar and hammer and beat the chain out of tree. Tore up some teeth flatten one it. It looked like.i probably shouldn't have but I had to know. The chain would still spin free on bar I started saw and it moved fine. Walked over and it dropped they tree.i couldn't tell the bad teeth.. My buddy showed up in let him try the chain out he gave had the chance yet but was crazy excited about how fast it cut threw cutting up the trees I dropped and the but cut slices on ground. Then I showed him the damage I did to chain. He is now going to be a customer of yours. Oh yeah no I'm not cutting little garden brush. When I say tree the smallest one is around 14" at base

CHAINS that keep on cutting

These carbide chainsaw chains are great for prolonged use. I cut up 40 firewood logs roughly 18 feet long and 12 to 20 inches in diameter and the carbide chain is still sharp. A regular chain only lasts about 5 to 7 logs before needs tobe resharpened. They cost more but are well worth it. Give them a try, you won't be disappointed.

I��m never going back to standard chains

We have a lot of old elm trees on our property, and would end up having to replace chains after less than 30 minutes of use. I decided to try this upgrade, and it made a world of difference. Even when I accidentally hit the ground, it doesn��t seem to dull the tips. Even not being able to shsrpen them becsuse neither I nor any of the businesses offering sharpening services near me hsbe the eauipment to do carvide chsind, it��s still worrh hsving a chain that lasts 5x-10x lomger thsn a standard one.Once you go carbide, you��ll never go back.

great chain

very good when digging around stump to cut roots for stump removal, just don't hit any rocks, and unlike a normal chain, dirt does not dull it instantly.

1 2 3